Selection and application of imported generator

Author：gdlhwt Time：2014-08-25  

With the imported generator is more and more application in industry, import generators of the increasingly high demand, considering the cooling liquid used is also a large number of users, the generator cooling liquid good facilitates the use of generators, that how can we choose good cooling liquid and the use of cooling liquid? Below by Xiao Bian explain:

Import generators work, normal temperature cooling water should be maintained at 75~90 DEG C, then import the generator can emit maximum power, fuel consumption will be close to the state of the economy, mechanical wear degree is low. If the cooling water temperature is too high or too low, or the unauthorized removal of the thermostat, will make the cooling system function decrease or loss of. Because import generators at work, fuel burning will emit a lot of heat energy, the cylinder gas temperature is up to 1800~2000 DEG C, heat and combustion produces only 30%~40% is converted to mechanical energy, about 20%~25% of cooling system away. If the work of arrhythmia cooling system, cooling water temperature is too high or too low, will not only affect the normal operation of diesel engine, or even have a failure and accident. Cooling water should be used in slightly alkaline cleaning water, compounds do not contain corrosive, cooling medium from cooling water to the development direction of the cooling liquid. The cooling system is to use clean soft water, should make the cooling water control of pH value in the range of 8~11, to reduce as far as possible in the cooling system fouling plug, to prevent the effects of cooling effect. To use chemical agents to regularly clean the cooling system inside the use, to ensure the cooling cycle of good, normal cooling.